Back to Liquid Atomizing Nozzles Home 

Jump to: What is it? | Why Use it? | Applications | Advantages | Droplet SizeInstallation Sheets


atmozingnozzles

Atomizing Nozzles
 

Multiple Nozzles!
Multiple Patterns!


narrowangle

A Model AN1010SS Narrow Angle Atomizing Nozzle is used to mark strips of steel before they leave the mill.

SR1010SSdrill 250

A Model SR1010SS Siphon Fed Round Pattern Atomizing Nozzle is used to supply a cooling mist for a drilling operation.

What Are Atomizing Nozzles?

EXAIR’s atomizing spray nozzles atomize fluids (most commonly water) in a range of spray patterns for a variety of uses. They combine liquid and compressed air to create a mist of atomized liquid that can be easily adjusted to meet the needs of your application. All models use stainless steel construction for durability and corrosion resistance.

EXAIR's Atomizing Nozzles are available in 4 basic families:

Internal Mix:

For pressure fed applications with independent air and liquid control.
Internal mix nozzles mix the liquid and water inside the air cap and produce the finest atomization. Internal mix nozzles can be used on liquids with a viscosity up to 300 cp. Both air and liquid sides are pressure fed. >More

External Mix:

For pressure fed applications that don't require independent air and liquid control.
External mix nozzles have the highest flow rates and allow the air and liquid flows to be adjusted independently. These nozzles are best where precise liquid flow is needed. External mix nozzles can be used on liquids with a viscosity above 300 cp. Both air and liquid sides are pressure fed. >More

Siphon Fed:

Siphon or gravity fed for non-pressurized applications.
Siphon fed nozzles require no liquid pressure and can be used with gravity fed liquids or lift liquids from a siphon height as much as 36 inches (91cm).
Siphon fed nozzles can be used on liquids with a viscosity up to 200 cp. >More


Why Atomizing Nozzles?

With EXAIR’s atomizing nozzles, you can coat, cool, treat and paint a variety of products. Used with water, atomizing nozzles are an efficient way to evenly cool hot items in your automated process. These nozzles are also an excellent choice for dust mitigation. The maximum operating temperature for the atomizing nozzles is 400°F (204°C).


EB1030SSwine 250

Model EB1030SS External Mix Wide Angle Flat Fan Pattern Atomizing Nozzles are used to give a final sanitary rinse prior to labeling wine bottles.

Applications

  • Washing
  • Rinsing
  • Coating
  • Cooling
  • Quenching
  • Wetting (moistening)
  • Humidification
  • Dust Control

Advantages

  • Fully adjustable
  • Maximises liquid dispersion
  • Minimizes liquid consumption
  • All stainless steel construction
  • Compact
  • Versatile
  • Interchangeable liquid and air caps
  • Minimizes air consumption
  • Fine atomization

Droplet Size and Spray Angle

Droplet size can be adjusted by varying either the air or liquid pressure. An increase in air pressure or decrease in liquid pressure will generally produce a smaller droplet size. The Spray Angle is the trigonometric angle created by the width of the spray pattern and the distance at which it is measured. Click here to view the Liquid Air Nozzle Droplet Size and Spray Angle Chart.


Installation and Maintenance Sheets

Atomizing Spray Nozzles 

getacro
These files are in the Adobe Acrobat PDF format. The viewer is free and is available at www.adobe.com
Back to Liquid Atomizing Nozzles Home 
Compressed Air Australia

GPO Box 2792, Darwin,
Northern Territory 0801, Australia
Tel: +61 8 8983 3999
Fax: +61 8 8983 3900